Amazon.com.au:Customer reviews: LONENESSL 3D PLA Printing Filament 1.75mm 1KG Spool Printer Filament Bundle, Dimensional Accuracy +/- 0.11 mm Printer Consumables

Top positive review

Fantastic colour, excellent prints

Reviewed in Australia on 21 March 2022

Been printing lots of little containers with this filament. Absolutely loving the colour of the yellow.
Zero issues printing (200C nozzle, 60C bed on a PEI sheet on my relatively well dialled in printer).
I have another couple of colours that I’ll be able to review soon (red and silver). Hopefully they print just as well as this colour does!

Top critical review

All critical reviews›

Haven't had a single successful print!

Reviewed in Australia on 2 August 2021

Where do I even begin? I have a Flashforge Adventurer 3. I tried this brand of PLA today. I could not get it to stick to the bed no matter what I did. Warps so bad and get unstuck from the bed while printing. Tried glue sticks, re-calibration of bed, different temps 200,210,215,220, nothing works! Attempted to print a little plastic piece 6 times NO LUCK!

At the same time Flashforge PLA works perfectly.

3 people found this helpful

Sort by

Filter by

116 global ratings | 30 global reviews

There was a problem filtering reviews right now. Please try again later.

From Australia

Haven't had a single successful print!

Reviewed in Australia on 2 August 2021

Verified Purchase

3 people found this helpful

Helpful

James

Doesn't stick.

Reviewed in Australia on 28 July 2021

Verified Purchase

Really poor bed adhesion and some audible crackling/bubbling on extrusion.
Isn't clear at first, but when you print anything at standard temps including 60-70 degrees bed heat, it doesn't adhere. Edges are warped. Support layers are laughable and will fail despite meticulous bed levelling between filament change. The other filaments I used like X3D work fine when I changed back.

If anyone is stuck with it like me, I've gotten some better results using a glue stick AND using a bed heat of 80 degrees. (Yes. it's hot)

3 people found this helpful

Helpful

Robert W

Just not very good.

Reviewed in Australia on 24 September 2021

Colour Name: GreenVerified Purchase

Yeah it's cheap, but I'd look elsewhere. I've tried 3 rolls of PLA from this brand and consistently I have found the print quality to be very sub par. Mostly a bubbly surface finish and poor layer adhesion. I've tested at a range of temperatures and tried drying the filament overnight in a filament dryer, little to no improvement.

I tried this brand as the CC diy has increased in cost, but the quality of that filament if far far better, so I'd suggest looking into that.

2 people found this helpful

Helpful

Ryan S

Avoid, poor adhesion and string

Reviewed in Australia on 29 January 2022

Colour Name: BlueVerified Purchase

Let's start with the good bits:
Nice blue and consistent colour
Price is reasonable for 1kg package
Doesn't smell
Good for very small and thin print jobs

Here are the bad bits:
At least one edge of larger prints will lift (randomised edge) no matter what the bed temperature is, I used 60, 72 and 80 C° and had issues with it.
Very stringy, leaves "cotton candy" strings all around to the model and half of it usually sticks to the model, ruining the print.
Inconsistent flexibility of the printed PLA.

I stopped using it after 7 failed prints.

I'm going to use it in my weed wacker, I might see better results.

One person found this helpful

Helpful

Sid

Fantastic colour, excellent prints

Reviewed in Australia on 21 March 2022

Colour Name: Fluorescent YellowVerified Purchase

Helpful

Sherman

Easy to print, Good value

Reviewed in Australia on 13 July 2021

Colour Name: RedVerified Purchase

The red color not as bright as the one I have previously, however, it is 10 times more easy to print than my previous one. Both blue and violet colors are good as well, however, the green color is the worst, the diameter on the color filament is only 1.67 on average, I need to readjust my extruder tension, otherwise it could not grep the filament properly.
For Green color I give it 1 star, for Red i give it 4 star, both Blue and Violet, i give it 5 star

Helpful

jack kennedy-salter

Poorly wound on the reel ruins multiple long prints

Reviewed in Australia on 15 August 2021

Colour Name: BlackVerified Purchase

This filament prints good, adheres to the bed well and is of good quality... When it hasn't tied itself in a knot.

I've had multiple prints fail because of this poor winding on the spool.

I would not recommend this filament. I've bought several other spools of filament from various other sellers on amazon and the quality on the spool is far far superior to this.

Helpful

Awesome quality

Reviewed in Australia on 22 March 2021

Colour Name: BlackVerified Purchase

Awesome quality. I will definitely buy again from this seller.
I just need to improve a little but no related to the filament.

One person found this helpful

Helpful

Cambell

Excellent PLA+ filament

Reviewed in Australia on 12 September 2021

Colour Name: GreenVerified Purchase

I bought a heap of these filaments after using the grey and orange. All of them print beautifully on my Anycubic Mega Pro. 205degrees, 60degree bed. Basic 0.2mm layers 0.4nozzle.

Helpful

daniel rath

Really not great

Reviewed in Australia on 30 December 2021

Colour Name: BlueVerified Purchase

Absolutely battle to get it to stick to the bed, rubbish quality, diameter of filament is all over the place ranging anywhere from 1.59mm to 1.82mm. More than I’d usually spend on filament and I’ll probably just bin it because it’s unusable

Helpful

Need customer service? Click here

‹ See all details for LONENESSL 3D PLA Printing Filament 1.75mm 1KG Spool Printer Filament...

5 star		58%
4 star		15%
3 star		8%
2 star		8%
1 star		13%

LONENESSL 3D PLA Printing Filament 1.75mm 1KG Spool Printer Filament...

›

Customer reviews

Customer reviews

LONENESSL 3D PLA Printing Filament 1.75mm 1KG Spool Printer Filament Bundle, Dimensional Accuracy +/- 0.11 mm Printer Consumables

Top positive review

Top critical review

There was a problem filtering reviews right now. Please try again later.

From Australia

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

LONENESSL 3D PLA Printing Filament 1.75mm 1KG Spool Printer Filament... › Customer reviews

Customer reviews

LONENESSL 3D PLA Printing Filament 1.75mm 1KG Spool Printer Filament Bundle, Dimensional Accuracy +/- 0.11 mm Printer Consumables

Top positive review

Top critical review

There was a problem filtering reviews right now. Please try again later.

From Australia

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

LONENESSL 3D PLA Printing Filament 1.75mm 1KG Spool Printer Filament...

›

Customer reviews